|
|
|
The IBM 6546 is a G52 Color monitor that features a 15-inch (nominal) FST CRT with a viewable image size of 13.6 inches (347 mm), incorporating a 0.28 mm dot pitch. A maximum horizontal frequency of 69KHz provides flicker-free operation at an optimum 1024 x 768 pels at up to 85Hz non-interlaced with a maximum addressability of 1280 x 1024 pels. This monitor supports a wide range of display modes and attaches to, and operates with, many IBM and equivalent non-IBM PC systems.
|
|
L X W X H:
24 in X 20 in X 23 in
|
|
|
|
|
|
|
Item Specifications:
| G52 15" FST (13.6"
VIS) 69kHz MPR II (Pearl White) |
Model Name: 654600N
Part Number:
654600N
|
llll | |
![""]("/icons/ecblank.gif") |
Technical
Details | |
|
Compatibility |
|
| ll |
Restrictions: |
-Not all available
display modes run at the high refresh rates necessary for
flicker-free performance. Display modes at lower refresh rates
are available for compatibility with older graphics adapters
and system units., -Supported display modes are a function of
the attaching system unit. The full range of display modes
available with these monitors may not be available or
supported with all combinations of system units, their
operating systems, and application software., -Horizontal and
vertical sync signal timings are critical in order to achieve
acceptable screen images. As a consequence, support for all
possible variations in H/V sync timings for any display mode
cannot be stated., -The number of colors shown in any display
mode is not limited by the monitor but depends upon the
capabilities of the adapter the monitor is attached to., -The
power managemeft function is invoked only after initiating
signals are received from the attached system unit and/or
graphic adapter. The method used to implement power management
follows the Video Electronics Standards Association (VESA)
Display Power Management Signaling (DPMS) standard. This
standard must also be implemented in the attaching system unit
and/or graphic adapter for monitor power management to be
effective., -Implementation of monitor Plug and Play follows
the VESA Display Data Channel (DDC) standard. This standard
must also be implemented in the attaching system unit hardware
and software to be effective., -Not all system units are
DDC-enable. In this situation the user is required to perform
the configuration necessary to obtain optimum performance from
the system/graphic, adapter/monitor combinations., -The 64KB
color depth mode is not supported on the Netfinity 7000 or PC
Server 704. |
|
Hardware
prerequisites:
System
Units |
|
|
_ IBM Systems: |
Netfinity 1000,
Netfinity 3500 models, Netfinity 3000, Netfinity 5000,
Netfinity 5500, Netfinity 5500 Rack Mounted models, Netfinity
5500 M20, Netfinity 5500 M20 Rack Mounted models, Netfinity
7000, Netfinity 7000 Rack Mounted models, PC 140, PC 300GL, PC
300GL Pentium II models (6561, 6591), PC 300PL, PC 300PL
Pentium II models, PC 300XL, PC 330, PC 340, PC 350, PC 360,
PC 365, PC 730 (6877), PC 750 (6887), Aptiva E Series (2137,
2138, 2139, 2153), Aptiva Series (2156), Aptiva S Series
(2139), PC Server 310 200MHz models, PC Server 315, PC Server
325, PC Server 325 Rack Mounted models, PC Server 330, PC
Server 704, Netfinity Rack |
|
_ Non-IBM systems: |
The G52 Color Monitor is designed to
operate with system units or video adapters that generate a
video output signal that falls within the specifications
below:
Maximum addressability (pels) -
1280x1024
Horizontal frequency (KHz) - 30-69
Vertical
frequency (Hz) - 50-120 |
|
Operating system
requirements: |
-- |
|
Adapters: |
-- |
|
Mounting kit
etc.: |
-A signal cable
adapter part number 96G1999 is required to permit attachment
to 3483, 3488-V, and 3489 Modular Display Stations bits
presented on the monitor interface. |
|
Supported
software: |
-- |
|
Product
approvals/certifications4: |
CE MARK (Europe),
CSA C22.2 No. 950 (Canada), DNHW (Canada), EMI (B) (Korea),
FCC Class B (US), FDA/DHHS (US), GS (Germany), ICES-003 Class
B (Canada), NOM (Mexico), PTB (Germany), SEMKO (Sweden),
UL-1950 First Edition |
|
Energy Star
Compliant: |
Yes | |
|
Characteristics |
|
| ll |
Display case
color: |
Pearl
white |
|
Terminal
Type: |
|
|
Tube type: |
FST CRT
|
|
Nominal screen size:
|
15inches
(381mm) |
|
Viewable image size:
|
13.6inches
(347mm) |
|
Maximum viewable
width: |
280mm |
|
Maximum viewable
height: |
210mm |
|
pixel pitch/type
|
0.28mm
dot |
|
Anti-glare:
|
Yes |
|
Anti-static:
|
Yes |
|
Touch screen:
|
No |
|
Tilt/swivel stand:
|
Yes |
|
Screen surface
treatment: |
Anti-reflective
|
|
Multimedia features:
|
-- |
|
Multiscanning:
|
Yes |
|
Number of factory
presets: |
9 |
|
Number of user
presets: |
14 |
|
Preset modes:
|
640x480/60, 75,
85 |
|
Microprocessor
control: |
Yes |
|
Syncing: |
Multifrequency
|
|
Top flicker free
VESA mode: |
1024x768 at 85Hz
NI |
|
Maximum
addressibility: |
1280x1024
|
|
Onscreen
programming: |
Yes |
|
Self-diagnostics:
|
No |
|
Plug and play
support: |
Yes |
|
Ergonomics:
|
EPA Energy Star
compliant (US), GS (Germany), ISO 9241 Part 3, NUTEK, Proposed
VESA 85Hz NI support
|
|
Emissions:
|
EMI (B), FCC Class
B, ICES-003 Class B, MPR-II, SWEDAC |
|
Acoustics:
|
LWAD = 4.5 bels or
less |
|
Apple/workstation
compatible: |
-- |
|
Vertical refresh
rate (low; high) (Hz): |
50 Hz; 120
Hz |
|
Maximum Horizontal
frequency (low; high) (kHz): |
30 kHz; 69
kHz |
|
Power management
features4: |
VESA DPMS
compliant
VESA DDC1/DDC2B
|
|
Power consumption:
|
90Watts |
|
Video inputs
(connectors): |
-- |
|
User display
controls: |
Brightness,
Contrast, Degauss, Degauss via Power Switch, Digital Control,
Horizontal position, Horizontal size, Image rotation,
Pincushion adjustment, Selectable color points, Tilt,
Trapezoidal adjustment, Vertical position, Vertical
size |
|
Other:
|
-Supports most
standard VGA, SVGA and XGA applications without
modification
-A DDC-enabled monitor
continually sends a stream of data through the video
signal cable. The system unit stores and analyzes the
received data and determines the combination of
addressability and refresh rate (display mode) that best
uses the capabilities of the
monitor.
-The
factory preset modes cannot be overwritten but any of them
can be adjusted to personal choice. The new settings are
automatically stored in one of the user locations and are
recalled each time that mode is used. The factory setting
for the mode is use, if any, can be restored by operating
the Geometry Reset control.
-It may be necessary to
make some adjustments to the displayed picture to
compensate for variations in video signal timings. The
user controls can be used to make these
adjustments.
-The G52 Color Monitor is supplied with a 1.8 meter
(6 feet) video signal cable. This cable carries the same
15-pin D-shell video connector as previous IBM monitor and
are DDC 1/2B compatible for connection to newer DDC
enabled system units.
-Supports the following InfoWindow Display Modes:
2, 3, 4, 5*, 6 *If the signal cable adapter is not used,
this mode can be supported at the 60Hz refresh rate. The
mode will not be ISO compliant, and power management will
not function.
-Selectable color points: 9300K and
7200K
-Boarderless operation
-Clock Rate (mpels/sec):
110
-Tilt/swivel stand characteristics: Tilt - 4.5
degrees forward/12 degrees backward, Swivel - 90 degrees
(both left and right)
-Status LED | |
|
Warranty 3 |
|
| x |
Limited Warranty
period and type: |
60 DAY Customer Carry-in Exchange | |
|
Weight & Dimensions 6 |
|
| l |
Weight: |
29.8 lbs |
|
Travel weight:
|
-- |
|
Height: |
15.2
inches |
|
|
Width: |
14.5
inches |
|
|
Depth: |
16.4
inches |
|
Operating
Temperature (C) (low; high): |
10; 35 |
|
Relative Humidity
(%) (low; high): |
8; 80 |
|
Ship
Information
Box
1
Weight: |
-- |
|
Height: |
-- |
|
Width: |
-- |
|
Depth: |
-- |
|
Box
2
Weight: |
-- |
|
Height: |
-- |
|
Width: |
-- |
|
Depth: |
--
| | |
|
|
